Sizes Available include...
Poly fittings are a group of fittings available that increase the flexibility of irrigation systems.
These examples are just some of the large variety of poly fittings you can choose from. Keep in mind its a good idea to always "clamp" all fittings together to avoid the joins coming undone and wasting water.
|
The nut & tail fitting is used for connecting your poly pipe to a standard Garden tap. They all come with a washer for a water tight seal.
|
|
|
Directors are used to connect your polypipe to solenoid valves.
|
|
|
Tees are used so you can branch off your main line.
|
|
|
Reducing Tees are used when branching off the main line in smaller poly pipe.
|
|
|
Increasing Tees are used when branching off the main line to larger poly pipe.
|
|
|
Threaded Tee Female are used for connection Rigid risers & Shrub sprays to the polypipe line.
|
|
|
Threaded Tee Male are used for connecting lawn popups to the polypipe line.
|
|
|
Elbows are used to get your polypipe around corners.
|
|
|
Elbows are used to get your polypipe around corners.
|
|
|
Elbows are used to get your polypipe around corners.
|
|
|
Joiners are used to join two lengths of poly pipe together or to repair a line when it is damaged.
|
|
|
Clip on joiners are used to attach a garden hose to an irrigation system. Your choice is depended on the size of poly pipe you are using (ie 13mm or 19mm poly pipe).
|
|
|
Poly Pipe to Hose Connectors are used to attach an irrigation system to a garden tap. Your choice is depended on the size of poly pipe you are using (ie 13mm or 19mm poly pipe).
|
|
|
Cross are used where you need to branch off in two directons.
|
|
|
End Plugs are used to blank off the end of a run of poly pipe.
|
|
|
Ratchet clamps should be used on all poly pipe connections to ensure that the pipe stays on the barbed fitting.
|
|
|
Saddles are used to secure your poly pipe to a wall or a fence.
|
|
|
In-Line Filters trap particles to reduce clogging of emitters. Installed downstream from a tap or valve.
|
|
|
Inline valves are used on polypipe to allow you to manually isolate part of your irrigation system.
|
|
|
A Hole Punch is used to punch a hole into the poly pipe so you can attach either a spray jet or any of the 4mm barbed fittings.
|
|
|
We provide a range of stakes for garden and landscape applications. Our stakes provide the widest possible choice for all field conditions and most micro sprinklers.
|
|
|
Threaded couplings are used to join two ridged risers together. You can use them to extend ridged risers in the garden.
|
|
> 
Poly pipes or irrigation pipe is made of black polyethylene. The wall of this pipe is thin to allow for easy joining and fitting of drippers and sprayers. As a general rule, 13mm pipe can be used for drippers, but 19mm will feed more emitters. Sprayers need 19mm pipe, and pop-ups usually require 19mm or 25mm depending on water pressure.